where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
450 views
Technical Discussions
Ray
Engineering
Penn State, USA, Joined Mar 2004, 1

Ray

Engineering
Penn State,
USA,
Joined Mar 2004
1
00:22 Mar-09-2004
NDT - Delay Lines

Hi All

I am a new user to this field and have my first big project. A related quick question: we have 8 channels which we need to mux. All carry ultrasound responses at the same time. We are looking at delay methods so to sample all of them at the same time.

Any idea on what delay lines to use. We want to use analog delay lines, and want to limit losses. We work at low frequencies (< 10 MHz). Any ideas and brands


 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
04:11 Mar-13-2004
Re: NDT - Delay Lines
Ray, it's been a long time that I used analog delay lines.
One manufacturer was Belfuse. I suggest doing a Google
search to see which ones are still out there. Another mfg
we used was Kappa.

Nowadays it is all done digitally. Check out the newer
Texas Instruments AD converters.

All the best, Joerg.

----------- Start Original Message -----------
: Hi All
: I am a new user to this field and have my first big project. A related quick question: we have 8 channels which we need to mux. All carry ultrasound responses at the same time. We are looking at delay methods so to sample all of them at the same time.
: Any idea on what delay lines to use. We want to use analog delay lines, and want to limit losses. We work at low frequencies (< 10 MHz). Any ideas and brands
------------ End Original Message ------------




 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
01:59 Mar-13-2004
Re: NDT - Delay Lines
Ray, here is an example of one of the sources a Google
search yields:

http://www.bertech.com/Components/rcd/delaylines.htm

I suggest to stick with passive delay lines and prefer
lower impedances. That makes life easier at 10MHz. Also,
they need to be current driven for summation into a matching
output resistor, that's the usual scenario.

Resist the temptation of using silicon prop delays, it
can result in errors and phase noise.

Regards, Joerg.


----------- Start Original Message -----------
: Hi All
: I am a new user to this field and have my first big project. A related quick question: we have 8 channels which we need to mux. All carry ultrasound responses at the same time. We are looking at delay methods so to sample all of them at the same time.
: Any idea on what delay lines to use. We want to use analog delay lines, and want to limit losses. We work at low frequencies (< 10 MHz). Any ideas and brands
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window