where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

679 views
Technical Discussions
Steve B.
Steve B.
03:02 Mar-09-2004
I have a question on NDT testing ?

I was talking to my friend about rope access technology and he was saying something about NDT testing and I did a search online to find out more about it and my question is "Is NDT testing non destructive testing". I amnot familiar with the technology of the rope access industry but I thought this may help me find out more about confined space training. I am considering getting into this type of work so I want to find out all about it.
I will check back to see if anyone replied.
Thanks
Steve



    
 
 
Steven Johnson
Consultant
USA, Joined Mar 2004, 16

Steven Johnson

Consultant
USA,
Joined Mar 2004
16
00:25 Mar-13-2004
Re: I have a question on NDT testing ?
Yes NDT is Nondestructive Testing, also know as NDE or NDI. Good source of information also can be found at www.nde-ed.org

----------- Start Original Message -----------
: I was talking to my friend about rope access technology and he was saying something about NDT testing and I did a search online to find out more about it and my question is "Is NDT testing non destructive testing". I amnot familiar with the technology of the rope access industry but I thought this may help me find out more about confined space training. I am considering getting into this type of work so I want to find out all about it.
: I will check back to see if anyone replied.
: Thanks
: Steve
------------ End Original Message ------------




    
 
 
ravi
ravi
05:23 Sep-08-2005
I need a question on NDT testing(MT,LPT,UST) ?

: Steve
------------ End Original Message ------------
I AM STUDENT OF MThec
I NEED INFORMATION ABOUT THE NDT
I NEED THE FULL QUESTIONS ,COMVENTIONAL &OBJECTIVE
PLSE SEED THE SAME
THANK



    
 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window