where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
4214 views
Technical Discussions
ndt1
ndt1
05:11 Mar-09-2004
Film Speeds

What film speeds does everyone usually use for iridium, cobalt and for x-ray. (ie; Kodak AA 1.8, Kodak T 2.5 , both when using Iridium). I would like to hear from as many people as possible and I will compile the results and post them here afterwards. You can email me at rt.film@sympatico.ca .

I think it would good idea if there was a guide for film speed selection based on actual indistry use and practice. So I would like to hear from the radiographers who actually use these numbers. I find the film speeds on the charts provided with the exposure calculators are not always what works best in the field.

I think this guide could help everyone.

Include any type and brand of film you like and say whether it is manual or automatic processing.

Thanks in advance guys!

rt.film@sympatico.ca


 
 Reply 
 
jeanne
Teacher
The Ocean Corp., USA, Joined May 2004, 2

jeanne

Teacher
The Ocean Corp.,
USA,
Joined May 2004
2
07:16 Mar-19-2004
Re: Film Speeds
---I've worked in RT for over 25 years and find that what works for me with Iridium Agfa D4 I use 4.5R, Agfa D7 I use 1.8 and Agfa D5 I use 3. With Kodak M I use 5.3R, T = 3 and AA = 1.8. It usually works well for me with manual processing
-------- Start Original Message -----------
: What film speeds does everyone usually use for iridium, cobalt and for x-ray. (ie; Kodak AA 1.8, Kodak T 2.5 , both when using Iridium). I would like to hear from as many people as possible and I will compile the results and post them here afterwards. You can email me at rt.film@sympatico.ca .
:
: I think it would good idea if there was a guide for film speed selection based on actual indistry use and practice. So I would like to hear from the radiographers who actually use these numbers. I find the film speeds on the charts provided with the exposure calculators are not always what works best in the field.
:
: I think this guide could help everyone.
: Include any type and brand of film youlike and say whether it is manual or automatic processing.
:
: Thanks in advance guys!
:
: rt.film@sympatico.ca
------------ End Original Message ------------




 
 Reply 
 
TU PHAM ANH
TU PHAM ANH
04:29 Jan-22-2005
Re: Film Speeds
Dear sir,

I've just being contacted with RT for 4 months. I'm colecting the system of film datas and factor of them in defferent film manufactorers.

I'm looking forward to receiving your respond!

Start Original Message -----------
: ---I've worked in RT for over 25 years and find that what works for me with Iridium Agfa D4 I use 4.5R, Agfa D7 I use 1.8 and Agfa D5 I use 3. With Kodak M I use 5.3R, T = 3 and AA = 1.8. It usually works well for me with manual processing
: -------- Start Original Message -----------
: : What film speeds does everyone usually use for iridium, cobalt and for x-ray. (ie; Kodak AA 1.8, Kodak T 2.5 , both when using Iridium). I would like to hear from as many people as possible and I will compile the results and post them here afterwards. You can email me at rt.film@sympatico.ca .
: :
: : I think it would good idea if there was a guide for film speed selection based on actual indistry use and practice. So I would like to hear from the radiographers who actually use these numbers. I find the film speeds on the charts provided with the exposure calculators are not always what works best in the field.
: :
: : I think this guide could help everyone.
: : Include any type and brand of film you like and say whether it is manual or automatic processing.
: :
: : Thanks in advance guys!
: :
: : rt.film@sympatico.ca
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window