where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

581 views
Technical Discussions
Richard Finlayson
Richard Finlayson
04:34 Jan-05-1999
Cost Benefits/Economics of NDT

I need to find information on cost benefits of NDT. I have to sell NDT inspections as cost effective and benficial inspections. The party that I must convince are not experts in NDT and are only interested in the bottom line savings. They would like to see dollars saved. I am looking for any resourses that would give me this information.
Thanks for your help.


 
 Reply 
 
John McCanna
John McCanna
02:05 Jan-06-1999
Re: Cost Benefits/Economics of NDT
: I need to find information on cost benefits of NDT. I have to sell NDT inspections as cost effective and benficial inspections. The party that I must convince are not experts in NDT and are only interested in the bottom line savings. They would like to see dollars saved. I am looking for any resourses that would give me this information.
: Thanks for your help.

Dear Rick

I have utilized information contained in articles such
as:
"EQUIPMENT INTEGRITY INSPECTIONS ESSENTIAL TO RISK MANAGEMENT"
BY Helmut Thielsch & Florence Cone. CSNDT Journal Vol.-17, No.6 NOV?DEC 1996; and
"A COST OF QUALITY: THREE FINANCIAL METHODS FOR MAKING INSPECTION DECISIONS"
ASNT Materials Evaluation.

They worked for me. Good Luck.

John




 
 Reply 
 
Tom Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Tom Murphy

NDT Inspector
USA,
Joined Jul 2000
16
03:24 Feb-23-1999
Re: Cost Benefits/Economics of NDT
: : I need to find information on cost benefits of NDT. I have to sell NDT inspections as cost effective and benficial inspections. The party that I must convince are not experts in NDT and are only interested in the bottom line savings. They would like to see dollars saved. I am looking for any resourses that would give me this information.
: : Thanks for your help.

: Dear Rick

: I have utilized information contained in articles such
: as:
: "EQUIPMENT INTEGRITY INSPECTIONS ESSENTIAL TO RISK MANAGEMENT"
: BY Helmut Thielsch & Florence Cone. CSNDT Journal Vol.-17, No.6 NOV?DEC 1996; and
: "A COST OF QUALITY: THREE FINANCIAL METHODS FOR MAKING INSPECTION DECISIONS"
: ASNT Materials Evaluation.

: They worked for me. Good Luck.

: John

Hello,

I took a short course called NDT in the Quality
Hierarchy of ISO, TQM and SPC. It contained a good
deal of the outlining process of justification of
NDE/NDT from and economics basis.

The instructor was Emmanuel Papadakis, andthe course
took place at the 1998 fall conference in Nashville.
I don't have his business card, but perhaps you could
contact ASNT (they sponsored the course) for further
info.



 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window