where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
727 views
Technical Discussions
Akshay Singh
Akshay Singh
08:51 Mar-17-2004
transmissibiltiy

Hello:

I am trying to monitor transfer of low level signals through 2by4s (wood used for construction). It is well established that the signals travel pretty well along the grain of the length of the 2by4s. However the problem occurs when you arey trying to detected the signal across joints of 2by4.

My question is how can I improve the signal transfer through joints of the 2by4s. Does anybody have an insight?

Thanks
Akshay




 
 Reply 
 
John Rodgers
John Rodgers
02:24 Mar-17-2004
Re: transmissibiltiy
----------- Start Original Message -----------
: Hello:
: I am trying to monitor transfer of low level signals through 2by4s (wood used for construction). It is well established that the signals travel pretty well along the grain of the length of the 2by4s. However the problem occurs when you arey trying to detected the signal across joints of 2by4.
: My question is how can I improve the signal transfer through joints of the 2by4s. Does anybody have an insight?
: Thanks
: Akshay
------------ End Original Message ------------

Are you trying to propagate low frequency sound waves, or in the ultrasonic frequencies? Intimate contact is one of the prerequisites. Lower frequencies will also propagate better. Adhesive bonding or nailed joints will also propagate better. The nails will act as waveguides to couple sound from one piece of wood to the other. Are you passively listening or actively pulsing?


 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window