where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TWI
TWI is a world leading research and technology organisation established in 1946. From bases in the UK, USA, China, Malaysia, Middle East, India a ...
709 views
Technical Discussions
Akshay Singh
Akshay Singh
08:51 Mar-17-2004
transmissibiltiy

Hello:

I am trying to monitor transfer of low level signals through 2by4s (wood used for construction). It is well established that the signals travel pretty well along the grain of the length of the 2by4s. However the problem occurs when you arey trying to detected the signal across joints of 2by4.

My question is how can I improve the signal transfer through joints of the 2by4s. Does anybody have an insight?

Thanks
Akshay




 
 Reply 
 
John Rodgers
John Rodgers
02:24 Mar-17-2004
Re: transmissibiltiy
----------- Start Original Message -----------
: Hello:
: I am trying to monitor transfer of low level signals through 2by4s (wood used for construction). It is well established that the signals travel pretty well along the grain of the length of the 2by4s. However the problem occurs when you arey trying to detected the signal across joints of 2by4.
: My question is how can I improve the signal transfer through joints of the 2by4s. Does anybody have an insight?
: Thanks
: Akshay
------------ End Original Message ------------

Are you trying to propagate low frequency sound waves, or in the ultrasonic frequencies? Intimate contact is one of the prerequisites. Lower frequencies will also propagate better. Adhesive bonding or nailed joints will also propagate better. The nails will act as waveguides to couple sound from one piece of wood to the other. Are you passively listening or actively pulsing?


 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window