where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1126 views
Technical Discussions
Abdulhamid Al-Akel
Engineering
Saudi Arabia, Joined Mar 2003, 2

Abdulhamid Al-Akel

Engineering
Saudi Arabia,
Joined Mar 2003
2
01:56 Mar-20-2004
U/G condition Assessment

We have Oily water drain U/G lines that were found severly corroded and started leaking contaminating soil. These lines are C.S and externaly PE wraped. Please advise on available NDT methods that can be utilized to assess the condition of these lines without excavation.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1307

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1307
07:12 Mar-20-2004
Re: U/G condition Assessment
To assess the best option more details are needed.
Diameter of pipe, wall thickness, the maximum bend that migh represent restriction of instrumentation put in the line, the presence of any fittings that migh restrict access and the length of line are a few that come to mind.

I have seen a small diameter pigging tool (I think it was an RTD instrument) and Oceaneering has a good selection of ROVs that could be useful too.

----------- Start Original Message -----------
: We have Oily water drain U/G lines that were found severly corroded and started leaking contaminating soil. These lines are C.S and externaly PE wraped. Please advise on available NDT methods that can be utilized to assess the condition of these lines without excavation.
------------ End Original Message ------------




 
 Reply 
 
Gary
Consultant
TWI, United Kingdom, Joined May 2001, 15

Gary

Consultant
TWI,
United Kingdom,
Joined May 2001
15
09:35 Mar-20-2004
Re: U/G condition Assessment
----------- Start Original Message -----------
: We have Oily water drain U/G lines that were found severly corroded and started leaking contaminating soil. These lines are C.S and externaly PE wraped. Please advise on available NDT methods that can be utilized to assess the condition of these lines without excavation.
------------ End Original Message ------------

Teletest® is a novel non-invasive long range ultrasonic testing method for the rapid survey of pipes, for the detection of both internal and external corrosion. Other types of defect may also be detected.

The principal advantage is that long lengths of pipe, up to 175m (575ft) in each direction, may be examined from a single test point.

The benefits are:

Reduction in the costs of gaining access to the pipes for inspection.
Avoidance of removal and reinstatement of insulation or coatings (where present), except for the area on which the test head is mounted.
The ability to inspect inaccessible areas, such as at clamps or sleeved or buried pipes.
The whole pipe wall is tested, thereby achieving a 100% examination.





 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 281

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
281
08:25 Mar-21-2004
Re: U/G condition Assessment
This is one of those cases where you need a lot of details. In particular the issues over what degradation mechanism is occurring, reliability of NDE techniques to detect it and whether you need to size the damage. Access and cost become the next issues.

There are a number of techniques available.

Guided Wave UT is a screening option but effective ditance may be affected by access and the external PE coating.
Internal pigging tools will probbaly provide high quality data but you require access and they are not cheap.
There is a technique called No Pig from Germany which allows some screening with only contact at 1 km access points. Again it may not be cost effcetive.

Depending upon what you are looking at AE testing may also be able to produce effective data.

You need to consider a risk based screening approach with specific inspection selected at appropriate points.

Please contact me if you require more data.



 
 Reply 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window