where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1903 views
Articles & News
Hebri
Teacher, NDT inspection
Aïn Temouchent university, Oran, Algeria, Joined Mar 2013, 4

Hebri

Teacher, NDT inspection
Aïn Temouchent university, Oran,
Algeria,
Joined Mar 2013
4
12:26 Oct-02-2016
Acoustic Emission Source Identification in Pipes Using Finite Element Analysis
Overall

Hello,
I find this work interesting. In this work can we say that we are measuring the lamb wave?

 
 Reply 
 
P V SASTRY
R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D, India, Joined Jan 2003, 195

P V SASTRY

R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D,
India,
Joined Jan 2003
195
02:27 Oct-03-2016
Re: Acoustic Emission Source Identification in Pipes Using Finite Element Analysis
In Reply to Hebri at 12:26 Oct-02-2016 (Opening).


Dear Sir,

The classic definition of Acoustic Emission (AE) refers to the generation of transient elastic waves in the form of stress waves.

These stress waves can be originated from deep in the components (other than the pipes) having considerable thicknesses and are propagated in all directions. Eventually they reach the surface and can travel several meters and are picked up by the sensors.

When they reach the surface and propagate they can certainly be treated as Lamb waves but not very sure before they reach the surface from several centimeters from inside the component.

Best wishes

P V SASTRY

 
 Reply 
 
Hebri
Teacher, NDT inspection
Aïn Temouchent university, Oran, Algeria, Joined Mar 2013, 4

Hebri

Teacher, NDT inspection
Aïn Temouchent university, Oran,
Algeria,
Joined Mar 2013
4
13:57 Oct-03-2016
Re: Acoustic Emission Source Identification in Pipes Using Finite Element Analysis
In Reply to P V SASTRY at 02:27 Oct-03-2016 .

Dear Sir,
Thank you for your fast response. I have other questions about this article.
- Why the force is spread over a surface area, and in which direction the force is applied?
- can we do that with a concentrated force?
- If we applied the force not perpendicular to the surface, I mean with an angle, I think we will deal with a lamb wave?

thank you again

 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window