where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
1063 views
Technical Discussions
SURESH D
NDT Inspector,
NIT TRICHY, India, Joined Jan 2016, 18

SURESH D

NDT Inspector,
NIT TRICHY,
India,
Joined Jan 2016
18
17:54 Oct-04-2016
IRIS modeling software's?

I wish to do modelling of IRIS technique for my project work. Anybody can tell what all are the modelling software available for IRIS..

Thanks for your suggestions..

 
 Reply 
 
Brett
Brett
18:13 Oct-05-2016
Re: IRIS modeling software's?
In Reply to SURESH D at 17:54 Oct-04-2016 (Opening).

Suresh,

As far as modeling software goes for IRIS not many OEM's provide this extensive software. Most OEM's only provide a C-scan/bird's eye view of the tube. Some AUT companies do provide a 3-D model of the tube or pipe but not anyone I know specific to IRIS. I know AUT Solutions in Fulshear, Tx offers this type of modeling for their AUT. Speak with Bill

 
 Reply 
 
SURESH D
NDT Inspector,
NIT TRICHY, India, Joined Jan 2016, 18

SURESH D

NDT Inspector,
NIT TRICHY,
India,
Joined Jan 2016
18
05:13 Oct-08-2016
Re: IRIS modeling software's?
In Reply to Brett at 18:13 Oct-05-2016 .

Thanks for your response Brett..
I need more information regarding this question. I wish to get more suggestions for better clarity.

 
 Reply 
 
Ricardo de Oliveira Carneval
R & D, Advisor, Consultant, Professor, Inspector
retired, Brazil, Joined Jul 2016, 1

Ricardo de Oliveira Carneval

R & D, Advisor, Consultant, Professor, Inspector
retired,
Brazil,
Joined Jul 2016
1
00:51 Oct-12-2016
Re: IRIS modeling software's?
In Reply to SURESH D at 17:54 Oct-04-2016 (Opening).

Using the Ultrasonic Modulus of CIVA simulation software it is possible to modelling the IRIS technique.

 
 Reply 
 
Volodymyr
Engineering, Deputy Director for Technical Issues/Head of Testing Laboratory/Chief of department/NDT
Joint Stock Company, Portugal, Joined Mar 2016, 25

Volodymyr

Engineering, Deputy Director for Technical Issues/Head of Testing Laboratory/Chief of department/NDT
Joint Stock Company,
Portugal,
Joined Mar 2016
25
20:38 Oct-12-2016
Re: IRIS modeling software's?
In Reply to Ricardo de Oliveira Carneval at 00:51 Oct-12-2016 .

1. Good proposition for student (CIVA software has appropriate price).
2. I didn't find modulus for IRIS, sorry

 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1292

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1292
14:20 Oct-13-2016
Re: IRIS modeling software's?
In Reply to Volodymyr at 20:38 Oct-12-2016 .

Volodymyr, Ricardo noted that you would use the ultrasonic module of Civa. There is no special "IRIS" module. You just have to position your probe inside a cylinder and configure the scanning parameters.

 
 Reply 
 
SURESH D
NDT Inspector,
NIT TRICHY, India, Joined Jan 2016, 18

SURESH D

NDT Inspector,
NIT TRICHY,
India,
Joined Jan 2016
18
12:48 Oct-14-2016
Re: IRIS modeling software's?
In Reply to Ed Ginzel at 14:20 Oct-13-2016 .

Dear all,
Thanks for your responses..

I already familiar and working with CIVA UT module.i think no other specific software is not available. If anyone knows anything regarding this please share to me.

SURESH D

 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window