where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
634 views
Career Discussions
ANDREA LOZANO
ANDREA LOZANO
00:49 Nov-12-2016
question

I'm working in aviation, I need to comply a Service Bulletin, this bulletin require use the black light, my question is the black light required calibration? it's required the specialized service for do it this calibration?

Thanks, I appreciate your help.

    
 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
08:58 Nov-12-2016
Re: question
In Reply to ANDREA LOZANO at 00:49 Nov-12-2016 (Opening).

I dont know which are the controlling documents for the scope of your work (MPI / DP) however there will be a requirement for a minimum UV-A (black light) intensity at the inspection surface. The lamp output has to be checked to ensure it meets the requirements but it is the light meter which must be calibrated.

Standard practice for checking the output of the UV-A lamp is to have a jig to fix the lamp at a specific distance (often 300mm) from the measuring UV-A meter. The output from the lamp is first checked and recorded when new using a calibrated UV-A light meter. This is usually a minimum of 1200 micro Watts per square millimetre as per the UV-A intensity requirement AT THE INSPECTION SURFACE so your controlling procedure allows this as a maximum working distance for the lamp from the examination surface. Most controlling documents simultaneously require use of a calibrated white light meter to check that ambient white light is below a certain level. Records are kept to monitor the working life and decline in output of the bulb

So its your UV-A and white light meters that requires specialized calibration service whilst the bulb's performance is monitored by a routine quality control check.

Hope this helps.

Regards

    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 847

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
847
02:32 Nov-17-2016
Re: question
In Reply to Nigel Armstrong at 08:58 Nov-12-2016 .

Andrea,
You don't give much info about the aircraft the SB is on. From my experience, you will find the specs for Boeing and Airbus in their Standard Operation Procedure book. For other manufacturers, check out their NDT Maintenance Manual.

    
 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window