where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

I&T Nardoni Institute
A state-of-the-art company servicing the metal, mechanical, aeronautical and railway industrial sectors

805 views
Technical Discussions
John Wagner
Engineering
Tenneco Automotive, USA, Joined Apr 2004, 3

John Wagner

Engineering
Tenneco Automotive,
USA,
Joined Apr 2004
3
08:08 Apr-15-2004
Ultrasonic Detection of Adhesive Bonds

The product in question is typified by a torus of rubber bonded between two steel cylinders. Has there been any success in detecting disbonds in this type of construct?


    
 
 
Daniel H. Rice
Daniel H. Rice
00:03 Apr-16-2004
Re: Ultrasonic Detection of Adhesive Bonds
----------- Start Original Message -----------
: The product in question is typified by a torus of rubber bonded between two steel cylinders. Has there been any success in detecting disbonds in this type of construct?
------------ End Original Message ------------
I typed an earlyer message but, got cut off by the demand on the server on my end. This may be a duplicate.
If used properly and the limitations of ultrasonic inspection are observed. You can either image the bond using C-scan or automate using A-scan the inspection of sealers used in automotive applications and some of the rubber components.
I worked on the Henry Ford Technology Award team for 2000 At vehicle ops for North America.
The only company ready to do this is IRT Scan Master A sponser of this Fourm.
They have the only patented high out put transducer that is necessary to perform the inspection of the material in question.
If you need assistance on a full or part time basis I am available to reproduce our qualification method for this inspection.




    
 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 295

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
295
08:29 Apr-16-2004
Re: Ultrasonic Detection of Adhesive Bonds
----------- Start Original Message -----------
: The product in question is typified by a torus of rubber bonded between two steel cylinders. Has there been any success in detecting disbonds in this type of construct?
------------ End Original Message ------------

Dear John,

We have made some simple trials using Quasar Resonant Inspection (QRI) on some "Vibration Dampers", which in effect are two plates of steel with a rubber block bonded between them, or rather similar to what you describe.

These initial tests suggested that the technology could detect disbonds as well as some other problems in the manufacture.
However, the customer then had a severe reduction in budget, so was unable to pursue the technology further.
These tests were made here in the United Kingdom, but Quasar International is based in Albuquerque, NM.

I suggest you contact the office over there on (505) 247 9660.

Regards,

Godfrey Hands


    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
00:22 Apr-19-2004
Re: Ultrasonic Detection of Adhesive Bonds
We have successfully done work with very thick metal to rubber composites using Acousto-Ultrasound. Try talking to Physical Acoustics princeton new jersey its their technology we use.




    
 
 

Product Spotlight

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window