where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
862 views
Technical Discussions
Michael Hnytka
NDT Inspector,
IRIS NDT, Canada, Joined Aug 2002, 1

Michael Hnytka

NDT Inspector,
IRIS NDT,
Canada,
Joined Aug 2002
1
05:11 Apr-22-2004
Can you detect Copper Inclusion with TOFD

I am interested in any information about detecting copper inclusion in X70 pipe using TOFD. Any help in this matter would be appreciated.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1300

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1300
03:11 Apr-22-2004
Re: Can you detect Copper Inclusion with TOFD
Michael:
Detection of copper is difficult if just a small disolved quantity in a random location within the body of the pipe metal. Generally one looks for evidence of copper by its effect on the structure. This would generally be a dendritic cracking as copper tends to reduce toughness. To simply detect copper by diffraction or reflection off a presumed "molecular interface" is difficult if no cracking exists, this because the acoustic impedences are close enough that not much "reflection" occurs (e.g. 46MRayls for steel versus 42MRayls for copper).

If you have to look at the entire volume of a pipe for this type of subtle reflection using TOFD the probability is low that you can actually detect and correctly identify it as such with confidence that it is not some other "inclusion".

If instead of the pipe you are actually concerned for copper in the welds you may be able to improve your probable chances and confidence levels by looking for the cracking effects.

Lewis Morgan in the Nov 2003 Insight describes that the detection of copper was often misclassified but it CAN be detected.

Ed

----------- Start Original Message -----------
: I am interested in any information about detecting copper inclusion in X70 pipe using TOFD. Any help in this matter would be appreciated.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window