where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
670 views
Technical Discussions
Christian Mueller
Christian Mueller
03:42 Jan-20-2003
Software 2D/3D Computed Tomography NDT

We are looking for software for high performance 2-D/3-D X-ray CT system.
We are intend to use this software in combination with Comet x-ray tube housing assembly.
Who has practical experiences in this business field ?

Thank’s
Christian



 
 Reply 
 
Jim Knowles
Jim Knowles
04:09 Jan-20-2003
Re: Software 2D/3D Computed Tomography NDT
: We are looking for software for high performance 2-D/3-D X-ray CT system.
: We are intend to use this software in combination with Comet x-ray tube housing assembly.
: Who has practical experiences in this business field ?
:
: Thank’s
: Christian
.I have worked for many years on both 2D/3D and CT Imaging, and in particular with the COMET 320Kv Bi Polar tubehead.
The imaging varied from small dense packages to small diamter 8-15 mm diamter fuel tube assemblies.

The imaging used both CCD area array 1024 x 1024 and line array (8 and 12bit).

Software packages have developed over the years and developing further as well as faster.
Contact X-TEK Systems UK, +44 (0) 1442 828700
www.xtek.co.uk



 
 Reply 
 
Umesh Kumar
Umesh Kumar
04:41 Mar-19-2003
Re: Software 2D/3D Computed Tomography NDT
We are working on industrial CT imaging for almost 10 years. We have developed industrial CT using both gamma ray sources and constant potential X-ray generators. We have complete data acquisition system software, image reconstruction software for parallel beam and fan beam configuration using linear detector array and X-rays. However these are customised as per specific hardware.

Kindly contact Head, Isotope Applucations Division, Bhabha Atomic Research Centre, Mumbai, India for further details.



 
 Reply 
 
Vitor Silva
Vitor Silva
00:19 Jul-16-2003
Re: Software 2D/3D Computed Tomography NDT
We are working Bhabha Atomic Research Centre, Mumbai, India for further details.
.




 
 Reply 
 
parvatham.k
parvatham.k
04:02 Apr-27-2004
Re: Software 2D/3D optical Tomography
: I am working in periyar maniammai engineering college.I am doing one project in the field of optical communcation. I want coding for parallel beam image reconstruction : .
.



 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window