where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

905 views
Technical Discussions
Tariq
NDT Inspector,
Association sonatrach & British Petroleum & Statoil, Algeria, Joined Jun 2014, 10

Tariq

NDT Inspector,
Association sonatrach & British Petroleum & Statoil,
Algeria,
Joined Jun 2014
10
15:00 Jan-18-2017
The impact of removing excess welding metal

Hello Gents

In order to be able to have Ultrasonic reading of weld thickness over a nozzle, we removed the the Excess weld metal without touching the parent metal to have a straight contact between the UT probe and the weld metal
Question: is this removing of Excess weld metal affect negatively the integrity of equipment being tested or not

Thanks for advice me
Regards

 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
15:24 Jan-18-2017
Re: The impact of removing excess welding metal
In Reply to Tariq at 15:00 Jan-18-2017 (Opening).

Tariq, blending the excess weld cap metal to the parent metal is generally considered an improvement of the situation. Any stress riser effect at the transition is then removed. In some structures you will even find that the engineering drawings "require" removal of excess weld metal when the component is subject to cyclic loading.

 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
02:32 Jan-20-2017
Re: The impact of removing excess welding metal
In Reply to Tariq at 15:00 Jan-18-2017 (Opening).

Reinforcement is not intended to be part of the design thickness and in many codes is supposed to be removed to aide high quality NDE so your removal should not be an issue,

 
 Reply 
 
lawrence goldberg
NDT Inspector, NDT Inspector
USA, Joined May 2013, 13

lawrence goldberg

NDT Inspector, NDT Inspector
USA,
Joined May 2013
13
15:21 Jan-23-2017
Re: The impact of removing excess welding metal
In Reply to John O'Brien at 02:32 Jan-20-2017 .

One should look at AWS D1.1 and the usage of both weld toe grinding and weld toe hammer peening lg

 
 Reply 
 
Cesar Tovar
NDT Inspector, Quality assurance Representative
Toronto Transit Commission, Mexico, Joined Sep 2014, 7

Cesar Tovar

NDT Inspector, Quality assurance Representative
Toronto Transit Commission,
Mexico,
Joined Sep 2014
7
17:35 Jan-23-2017
Re: The impact of removing excess welding metal
In Reply to Tariq at 15:00 Jan-18-2017 (Opening).

Hi Tariq,

Here Engineering ordered do not touch the Crown in order to "increase" the life for a structure under cyclic load....the main issua is lack of penetration and lack of fusión at the root...and the results shows that the structure will have 30 years guaranty ...

 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window