where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

994 views
Technical Discussions
Al
Al
09:56 May-06-2004
Acoustic emission hydrophone for tool monitoring

Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
This sensor can monitor In-process small tools to .002"
(breakage,fracture and wear)


 
 Reply 
 
Allen Green
Allen Green
00:31 May-07-2004
Re: Acoustic emission hydrophone for tool monitoring
----------- Start Original Message -----------
: Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
: This sensor can monitor In-process small tools to .002"
: (breakage,fracture and wear)
------------ End Original Message ------------
Somebody is interested. Please send further information or patent number.
Thanks.



 
 Reply 
 
Jens Forker
Jens Forker
09:14 May-07-2004
Re: Acoustic emission hydrophone for tool monitoring
Hi Al,
please send further information directly to my email.
thanks and regards
Jens


----------- Start Original Message -----------
: Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
: This sensor can monitor In-process small tools to .002"
: (breakage,fracture and wear)
------------ End Original Message ------------




 
 Reply 
 
Georg Arnolds
Georg Arnolds
09:35 May-07-2004
Re: Acoustic emission hydrophone for tool monitoring
Hi Al!
Please send me further informations directly to my email.
Thanks.
G.
----------- Start Original Message -----------
: Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
: This sensor can monitor In-process small tools to .002"
: (breakage,fracture and wear)
------------ End Original Message ------------




 
 Reply 
 
keith moxey
keith moxey
00:26 May-07-2004
Re: Acoustic emission hydrophone for tool monitoring
Please send info to keith@jme.co.uk Many thanks

---------- Start Original Message -----------
: Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
: This sensor can monitor In-process small tools to .002"
: (breakage,fracture and wear)
------------ End Original Message ------------




 
 Reply 
 
Weiping Dong
Weiping Dong
05:17 May-07-2004
Re: Acoustic emission hydrophone for tool monitoring
I am interested in using acoustic emission for metal cutting tool and grinding wheel monitoring. Would you please send me further information about the hydrophone AE sensor?

Thanks,


----------- Start Original Message -----------
: Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
: This sensor can monitor In-process small tools to .002"
: (breakage,fracture and wear)
------------ End Original Message ------------




 
 Reply 
 
patil jayant n
patil jayant n
01:45 Oct-13-2004
Re: Acoustic emission hydrophone for tool monitoring
----------- Start Original Message -----------
: Is anybody interested in some information about the patented acoustic emission hydrophone for machine tool monitoring.
: This sensor can monitor In-process small tools to .002"
: (breakage,fracture and wear)
------------ End Original Message ------------

i interested to know how this hydrophone used in verious micromachining processes for tool conditioning monitoring like EDM,eletrochemical milling or eletrochemical grinding ,abrasive jet machining etc. if you have knowledge @ that please mail me on above mail.


 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window