where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
583 views
Technical Discussions
John Wagner
Engineering
Tenneco Automotive, USA, Joined Apr 2004, 3

John Wagner

Engineering
Tenneco Automotive,
USA,
Joined Apr 2004
3
04:46 May-12-2004
Ultrasonic Testing of Adhesive Bonds

The product is an automotive suspension component consisting of a torus of rubber molded between and bonded to two
coaxial steel cylinders. Attempts to test the bond via ultrasonics required submersion of the product in water. The result, even if successful, is an unsaleable product. What is needed is a technique for evaluating the bond on prototypes developed to complete FMEA testing prior to full scale production. Any suggestions for an application generally applicable to a range of products of this type would be appreciated.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
03:39 May-12-2004
Re: Ultrasonic Testing of Adhesive Bonds
Try calling NDT Automation Division of Physical Acoustics in Princeton New Jersey. Their T-SCOUT System may do the job.


 
 Reply 
 
Richard Kazares
Richard Kazares
06:00 May-13-2004
Re: Ultrasonic Testing of Adhesive Bonds
As you probably know, there are more ways than submersion in water to introduce an ultrasonic coupling techniques.

We have successfully used squirters, bubblers (weepers) - which use minute amounts of water only on the surface, and other elastomer couplants - which are typically used in wheel probes - but can also be fixed - WITHOUT any water couplant (or other gel-like materials) used.

Depending on your inspection requirements (I'm assuming you are looking for the bond between metal and elastomer - but you could possibly be looking at the elastomer consistency itself) there are other factors that might come into play.

I'd be happy to answer you directly - and in more detail, just send an e-mail.

----------- Start Original Message -----------
: The product is an automotive suspension component consisting of a torus of rubber molded between and bonded to two
: coaxial steel cylinders. Attempts to test the bond via ultrasonics required submersion of the product in water. The result, even if successful, is an unsaleable product. What is needed is a technique for evaluating the bond on prototypes developed to complete FMEA testing prior to full scale production. Any suggestions for an application generally applicable to a range of products of this type would be appreciated.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window