where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ZETEC, Inc.

5869 views
Technical Discussions
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
05:19 May-16-2004
Authorized Inspector


Can the forum members guide me how to apply for AI certification , OUTSIDE USA.


    
 
 
vernon ward
vernon ward
05:16 May-17-2004
Re: Authorized Inspector
----------- Start Original Message -----------
:
: Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
------------ End Original Message ------------

Contact John O'Brien at obirc@aol.com

He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.




    
 
 
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
09:21 May-30-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: :
: : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: Contact John O'Brien at obirc@aol.com
: He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.

Thank you for the information
------------ End Original Message ------------




    
 
 
llpcode
NDT Inspector
Shaw Group, USA, Joined Jan 2004, 3

llpcode

NDT Inspector
Shaw Group,
USA,
Joined Jan 2004
3
03:18 Jun-08-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : :
: : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : Contact John O'Brien at obirc@aol.com
: : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: Thank you for the information
------------ End Original Message ------------

Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.

You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.

Better to contact the National Board at 614-888-8320 and get clear information.


    
 
 
NAT
NAT
06:20 Jun-14-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------
Gentle men
Thanks for the info, NB did confirm that only AIA,Juridiction, user/owner can apply for examination.
Any AIAs interested in a volunteer who want to become an AI ?




    
 
 
Omar Kiptui
Omar Kiptui
02:45 Jun-14-2005
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------


You do not need to be in the employ of anyone to take the National Board Commission test. I just took it and passed, and have no job right now. You have to be in the employ of an AIA to get a commission, but you have 3 years after passing the testto do that.


    
 
 
murugesan
murugesan
08:00 Aug-20-2012
Re: Authorized Inspector
In Reply to Omar Kiptui at 02:45 Jun-14-2005 .

Sir

I just read your forum message that you took AI exam without being employed by an AIA or jurisdiction.

Did you find it easier to get a job after securing passing grade in AI exam.

I am also planning to take up the AI exam, but i am not employed by AIA or jurisdiction.

Please provide your input about how to prepare for the exam.

    
 
 
Danfer De la Cruz
Engineering
Peru, Joined Jun 2009, 11

Danfer De la Cruz

Engineering
Peru,
Joined Jun 2009
11
17:59 Aug-20-2012
Re: Authorized Inspector
In Reply to murugesan at 08:00 Aug-20-2012 .

Dear Sir.

I´m AI-ASME, API510, API653 and CWI.
You shall be attending 15 days a course in columbus-ohio before of test.
You shall be studing ASME seccion VIII, IX, I, IV , V, B31.1 and National Board.
Good Luck

    
 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window