where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1745 views
Articles & News
Gregory Bell
Gregory Bell
21:12 Mar-09-2016
Computed Tomography & 3D Metrology - Application of the VDI/VDE Directive 2630 and Optimization of the CT system
Overall

Where might I be able to find more information regarding this particular study? I am very interested in the compensations that were applied in the reconstruction algorithm.

Thank you,

 
 Reply 
 
kellyon
United Kingdom, Joined Mar 2017, 1

kellyon

United Kingdom,
Joined Mar 2017
1
12:16 Mar-20-2017
Re: Computed Tomography & 3D Metrology - Application of the VDI/VDE Directive 2630 and Optimization of the CT system
In Reply to Gregory Bell at 21:12 Mar-09-2016 (Opening).

Read Computed Tomography for Technologists: Exam Review by Lois Romans. Recently we ordered oneCT scanner at https://bimedis.com/search/search-items/computed-tomography-ct-scanners for our hospital so I started to read it too. Hope it will be useful.

 
 Reply 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window