where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1154 views
Technical Discussions
Daphnee Chouchena
Daphnee Chouchena
00:21 Mar-02-1999
Determining isolation houses

I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
- has isolation material been applied (gap characterisation?
- what is the thickness of the applied material?

I'd be very gratefull if someone could help me out.
Thanks very much.

I anybode


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
09:50 Mar-02-1999
Re: Determining isolation houses
: I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: - has isolation material been applied (gap characterisation?
: - what is the thickness of the applied material?

: I'd be very gratefull if someone could help me out.
: Thanks very much.

:

: I anybode
----------------------

Daphnee,

It may be difficult to get results for your application with use of ultrasonics. If at all it can be compared with ultrasonic testing of composites which offer similar difficult conditions. The wall with its isolation gape can be seen as a complex composite material. Characterization of composites can be done with ultrasonics and in particularly for your application low frequency airborne/air-coupled ultrasound may giveresults. On NDTnet we have literature and instruments in the exhibition of this field, e.g. QMI or NDTSystems offering air-coupled equipment. Through transmission technique is commonly used but may not be suitable for this application.

We have some experts of NDT in infrastructure on this forum - they may have an opinion?

Rolf
the requirements of your application are similiar to those of testing of composites with ultr



 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
00:09 Mar-02-1999
Re: Determining isolation houses
: I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: - has isolation material been applied (gap characterisation?
: - what is the thickness of the applied material?

: I'd be very gratefull if someone could help me out.
: Thanks very much.

:

: I anybode
-----------------------

Daphnee,
It may be difficult to get results for your application with use of ultrasonics. If at all it can be compared with ultrasonic testing of composites which offer similar difficult conditions. The wall with its isolation gape can be seen as a complex composite material. Characterization of composites can be done with ultrasonics and in particularly for your application low frequency airborne/air-coupled ultrasound may give results. On NDTnet we have literature and instruments in the exhibition of this field, e.g. QMI or NDTSystems offering air-coupled equipment. Through transmission technique is commonly used but may not be suitable for this application.

We have some experts of NDT in infrastructure on this forum - they may have an opinion?

Rolf



 
 Reply 
 
PEDRO MARTIN DELGADO
PEDRO MARTIN DELGADO
00:44 Sep-20-2000
Re: Determining isolation houses
: I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: - has isolation material been applied (gap characterisation?
: - what is the thickness of the applied material?

: I'd be very gratefull if someone could help me out.
: Thanks very much.

:

: I anybode





 
 Reply 
 
PEDRO MARTIN DELGADO
PEDRO MARTIN DELGADO
00:52 Sep-20-2000
Re: Determining isolation houses
: : I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: : When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: : Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: : - has isolation material been applied (gap characterisation?
: : - what is the thickness of the applied material?

: : I'd be very gratefull if someone could help me out.
: : Thanks very much.

: :

: : I anybode


I,m looking for the same information, if some body knows something about it i´ll be please to talk with





 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window