where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1148 views
Technical Discussions
Daphnee Chouchena
Daphnee Chouchena
00:21 Mar-02-1999
Determining isolation houses

I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
- has isolation material been applied (gap characterisation?
- what is the thickness of the applied material?

I'd be very gratefull if someone could help me out.
Thanks very much.

I anybode


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 618

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
618
09:50 Mar-02-1999
Re: Determining isolation houses
: I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: - has isolation material been applied (gap characterisation?
: - what is the thickness of the applied material?

: I'd be very gratefull if someone could help me out.
: Thanks very much.

:

: I anybode
----------------------

Daphnee,

It may be difficult to get results for your application with use of ultrasonics. If at all it can be compared with ultrasonic testing of composites which offer similar difficult conditions. The wall with its isolation gape can be seen as a complex composite material. Characterization of composites can be done with ultrasonics and in particularly for your application low frequency airborne/air-coupled ultrasound may giveresults. On NDTnet we have literature and instruments in the exhibition of this field, e.g. QMI or NDTSystems offering air-coupled equipment. Through transmission technique is commonly used but may not be suitable for this application.

We have some experts of NDT in infrastructure on this forum - they may have an opinion?

Rolf
the requirements of your application are similiar to those of testing of composites with ultr



 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 618

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
618
00:09 Mar-02-1999
Re: Determining isolation houses
: I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: - has isolation material been applied (gap characterisation?
: - what is the thickness of the applied material?

: I'd be very gratefull if someone could help me out.
: Thanks very much.

:

: I anybode
-----------------------

Daphnee,
It may be difficult to get results for your application with use of ultrasonics. If at all it can be compared with ultrasonic testing of composites which offer similar difficult conditions. The wall with its isolation gape can be seen as a complex composite material. Characterization of composites can be done with ultrasonics and in particularly for your application low frequency airborne/air-coupled ultrasound may give results. On NDTnet we have literature and instruments in the exhibition of this field, e.g. QMI or NDTSystems offering air-coupled equipment. Through transmission technique is commonly used but may not be suitable for this application.

We have some experts of NDT in infrastructure on this forum - they may have an opinion?

Rolf



 
 Reply 
 
PEDRO MARTIN DELGADO
PEDRO MARTIN DELGADO
00:44 Sep-20-2000
Re: Determining isolation houses
: I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: - has isolation material been applied (gap characterisation?
: - what is the thickness of the applied material?

: I'd be very gratefull if someone could help me out.
: Thanks very much.

:

: I anybode





 
 Reply 
 
PEDRO MARTIN DELGADO
PEDRO MARTIN DELGADO
00:52 Sep-20-2000
Re: Determining isolation houses
: : I'm looking for different NDT methods to determine the isolation value of houses (mainly brick and concrete walls).

: : When using Thermografy, does anyone know about the application and modelling the results to determine the isolation value?

: : Would it be possible to use Ultrasonic measurements, radar, laser or X-ray to determine:
: : - has isolation material been applied (gap characterisation?
: : - what is the thickness of the applied material?

: : I'd be very gratefull if someone could help me out.
: : Thanks very much.

: :

: : I anybode


I,m looking for the same information, if some body knows something about it i´ll be please to talk with





 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window