where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1147 views
Technical Discussions
Chris Chilton
Chris Chilton
02:38 May-14-2004
Cast Steel

I am trying to find an equivalent ISO and/or ASTM designations for BS 3100 Carbon & Manganese Casting Steels Grades AL1, AL2, AL3 & BL2.

Does anyone have any information on this or sources I can consult?


 
 Reply 
 
emily woo
emily woo
02:28 May-26-2004
Re: Cast Steel
i would like to know the advantages of CAST STEEL AS 2074 Grade C5.

----------- Start Original Message -----------
: I am trying to find an equivalent ISO and/or ASTM designations for BS 3100 Carbon & Manganese Casting Steels Grades AL1, AL2, AL3 & BL2.
: Does anyone have any information on this or sources I can consult?
------------ End Original Message ------------




 
 Reply 
 
James Dolfi
Director
ford, USA, Joined Oct 1999, 8

James Dolfi

Director
ford,
USA,
Joined Oct 1999
8
00:36 May-27-2004
Re: Cast Steel
----------- Start Original Message -----------
: i would like to know the advantages of CAST STEEL AS 2074 Grade C5.
: : I am trying to find an equivalent ISO and/or ASTM designations for BS 3100 Carbon & Manganese Casting Steels Grades AL1, AL2, AL3 & BL2.
: : Does anyone have any information on this or sources I can consult?
------------ End Original Message ------------

You may be able to get all the info you want at
http://www.key-to-steel.com/

They cross reference all steels and standards.



 
 Reply 
 
ian
ian
04:16 Jul-21-2004
Re: Cast Steel
thank you so much for this opportunity. i want to know about the chemical compositions of material called GS-60.3 . Thank you


 
 Reply 
 
Ed T.
Ed T.
05:28 Jul-22-2004
Re: Cast Steel
----------- Start Original Message -----------
: thank you so much for this opportunity. i want to know about the chemical compositions of material called GS-60.3 . Thank you
------------ End Original Message ------------
Try these links:

http://www.rz.fh-ulm.de/labore/wplabor/Englisch/FurtherInfo/Tests/Test11/metallographic%20determination%20v11.htm
http://www.felis.hr/en/cast-general.html
http://www.proximedia.com/local/jkservice/produkt1ban.htm


 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window