where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

456 views
Technical Discussions
allen whittick
allen whittick
06:04 Feb-07-2001
Re: reflection of the (ultra)sound waves
><: I'm looking for the information about reflections of (ultra)sound waves from soft (e.g. human body or soft polymers), respectively hard (e.g. wood) materials. In particular:
: 1. Differences in the changes of the wave attenuation and/or velocity upon reflection from hard material compared to the reflection from the soft material.
: 2. Is there a material dependent wavelength intervall where these differences are particularly large?
: 3. Where to find theoretical description of these changes?
: 4. Where to find material constants enabling to evaluate these changes?
: Will appreciate your response
: Best regards
: Anatol Krozer




    
 
 
Anatol Krozer
R & D, project manager
Imego Institute, Sweden, Joined Oct 1999, 2

Anatol Krozer

R & D, project manager
Imego Institute,
Sweden,
Joined Oct 1999
2
08:02 Feb-23-2000
reflection of the (ultra)sound waves

I'm looking for the information about reflections of (ultra)sound waves from soft (e.g. human body or soft polymers), respectively hard (e.g. wood) materials. In particular:
1. Differences in the changes of the wave attenuation and/or velocity upon reflection from hard material compared to the reflection from the soft material.
2. Is there a material dependent wavelength intervall where these differences are particularly large?
3. Where to find theoretical description of these changes?
4. Where to find material constants enabling to evaluate these changes?
Will appreciate your response
Best regards
Anatol Krozer


    
 
 
katie
katie
06:50 Aug-13-2001
Re: reflection of the (ultra)sound waves
: I'm looking for the information about reflections of (ultra)sound waves from soft (e.g. human body or soft polymers), respectively hard (e.g. wood) materials. In particular:
: 1. Differences in the changes of the wave attenuation and/or velocity upon reflection from hard material compared to the reflection from the soft material.
: 2. Is there a material dependent wavelength intervall where these differences are particularly large?
: 3. Where to find theoretical description of these changes?
: 4. Where to find material constants enabling to evaluate these changes?
: Will appreciate your response
: Best regards
: Anatol Krozer
hellbohmn,mn,mn



    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window