where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
896 views
Technical Discussions
X. Chen
X. Chen
02:23 Jun-17-2004
How to design a piezocomposite transducer?

I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
2.how to select the materials of the transducer?
3.how to determine the structure size of the transducer?


 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
02:53 Jun-21-2004
Re: How to design a piezocomposite transducer?
Try to get a copy of ULTRASONIC TRANSDUCERS FOR NONDESTRUCTIVE TESTING by M. G. Silk. It was published in 1984 by Adam Hilger Ltd, Bristol. There may be later editions. This book is a comprehensive review of transducer design and operation and also covers piezocomposite materials.
A lierature search should also produce several articles on transducer design.
Paul
----------- Start Original Message -----------
: I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
: 1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
: 2.how to select the materials of the transducer?
: 3.how to determine the structure size of the transducer?
------------ End Original Message ------------




 
 Reply 
 
X. Chen
X. Chen
03:13 Jun-21-2004
Re: How to design a piezocomposite transducer?
Thank you very much for your kindly help. I will try.

----------- Start Original Message -----------
: Try to get a copy of ULTRASONIC TRANSDUCERS FOR NONDESTRUCTIVE TESTING by M. G. Silk. It was published in 1984 by Adam Hilger Ltd, Bristol. There may be later editions. This book is a comprehensive review of transducer design and operation and also covers piezocomposite materials.
: A lierature search should also produce several articles on transducer design.
: Paul
: : I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
: : 1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
: : 2.how to select the materials of the transducer?
: : 3.how to determine the structure size of the transducer?
------------ End Original Message ------------


 
 Reply 
 
arun kumar
arun kumar
04:17 Oct-18-2004
Re: How to design a piezocomposite transducer?

I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
2.how to select the materials of the transducer?
3.how to determine the structure size of the transducer?




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window