where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Ultrasonic Sciences Ltd
We specialize in the design and manufacture of automated and semi-automated ultrasonic testing systems, including multi axis, multi channels systems and phased array electronics.
852 views
Technical Discussions
X. Chen
X. Chen
02:23 Jun-17-2004
How to design a piezocomposite transducer?

I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
2.how to select the materials of the transducer?
3.how to determine the structure size of the transducer?


 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
02:53 Jun-21-2004
Re: How to design a piezocomposite transducer?
Try to get a copy of ULTRASONIC TRANSDUCERS FOR NONDESTRUCTIVE TESTING by M. G. Silk. It was published in 1984 by Adam Hilger Ltd, Bristol. There may be later editions. This book is a comprehensive review of transducer design and operation and also covers piezocomposite materials.
A lierature search should also produce several articles on transducer design.
Paul
----------- Start Original Message -----------
: I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
: 1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
: 2.how to select the materials of the transducer?
: 3.how to determine the structure size of the transducer?
------------ End Original Message ------------




 
 Reply 
 
X. Chen
X. Chen
03:13 Jun-21-2004
Re: How to design a piezocomposite transducer?
Thank you very much for your kindly help. I will try.

----------- Start Original Message -----------
: Try to get a copy of ULTRASONIC TRANSDUCERS FOR NONDESTRUCTIVE TESTING by M. G. Silk. It was published in 1984 by Adam Hilger Ltd, Bristol. There may be later editions. This book is a comprehensive review of transducer design and operation and also covers piezocomposite materials.
: A lierature search should also produce several articles on transducer design.
: Paul
: : I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
: : 1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
: : 2.how to select the materials of the transducer?
: : 3.how to determine the structure size of the transducer?
------------ End Original Message ------------


 
 Reply 
 
arun kumar
arun kumar
04:17 Oct-18-2004
Re: How to design a piezocomposite transducer?

I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
2.how to select the materials of the transducer?
3.how to determine the structure size of the transducer?




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window