where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
865 views
Technical Discussions
John Quiroga
Colombia, Joined Sep 2017, 2

John Quiroga

Colombia,
Joined Sep 2017
2
23:18 Sep-10-2017
which are the most reliable NDT methods for detecting cracks

Hi,

I want to built a testing bench for detecting and quantifying cracks in carbon steel pipes between 2 and 3 inches. For doing so, I need to select the suitable NDT technique and sensor.
Which NDT methods are more suitables? and where should I look for information to go deeper in the subject

Thanks

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 804

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
804
03:13 Sep-11-2017
Re: which are the most reliable NDT methods for detecting cracks
In Reply to John Quiroga at 23:18 Sep-10-2017 (Opening).

ID, OD, axial, circ - what are you looking for ?

 
 Reply 
 
John Quiroga
Colombia, Joined Sep 2017, 2

John Quiroga

Colombia,
Joined Sep 2017
2
04:21 Sep-11-2017
Re: which are the most reliable NDT methods for detecting cracks
In Reply to Anmol Birring at 03:13 Sep-11-2017 .

It is OD, and its for detecting wahtever type of cracks

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 305

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
305
16:58 Sep-11-2017
Re: which are the most reliable NDT methods for detecting cracks
In Reply to John Quiroga at 23:18 Sep-10-2017 (Opening).

How much product do you need to inspect? Over what period of time?
What is the condition of the product?
How fast do you need to inspect?
Do you need automation?
What size of crack must you detect?
What budget do you have available?

These are just some more questions.

Godfrey

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 804

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
804
03:17 Sep-12-2017
Re: which are the most reliable NDT methods for detecting cracks
In Reply to John Quiroga at 04:21 Sep-11-2017 .

MT- longitudinal + circular

 
 Reply 
 
Rakesh Parmar
NDT Inspector,
India, Joined Dec 2014, 58

Rakesh Parmar

NDT Inspector,
India,
Joined Dec 2014
58
11:30 Sep-14-2017
Re: which are the most reliable NDT methods for detecting cracks
In Reply to John Quiroga at 23:18 Sep-10-2017 (Opening).

Cracks which are open to the surface , will easily detected by PT or MT , MT or PT which method shall be use it is up the material , weather it is carbon steel, stainless steel.

In short Every NDT method has its own limitations and advantages over detecting cracks.
so different method will give u different results.

greetings.

 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window