where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.

786 views
Articles & News
Mark
,
Zambia, Joined Jun 2016, 49

Mark

,
Zambia,
Joined Jun 2016
49
13:18 Nov-02-2017
Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array
Overall

2    
 
 
Vadim Kniazev
R & D, Director
Wave Process Simulation System Laboratory, Russia, Joined Jun 2010, 3

Vadim Kniazev

R & D, Director
Wave Process Simulation System Laboratory,
Russia,
Joined Jun 2010
3
19:04 Dec-01-2017
Re: Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array
In Reply to Mark at 13:18 Nov-02-2017 (Opening).

Dear colleagues,
This article is devoted to determining the real size of a planar defect:
Opposite Phased Transducer – OPT for Sizing of Defects
http://www.researchgate.net/publication/266618048_Opposite_Phased_Transducer__OPT_for_Sizing_of_Defects

It uses a fundamentally different technology for length sizing.

I hope that this article will be interesting for you.
Your opinion is very important to me.

    
 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window