where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
991 views
Articles & News
Mark
,
Zambia, Joined Jun 2016, 49

Mark

,
Zambia,
Joined Jun 2016
49
13:18 Nov-02-2017
Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array
Overall

2
 
 Reply 
 
Vadim Kniazev
R & D, Director
Wave Process Simulation System Laboratory, Russia, Joined Jun 2010, 4

Vadim Kniazev

R & D, Director
Wave Process Simulation System Laboratory,
Russia,
Joined Jun 2010
4
19:04 Dec-01-2017
Re: Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array
In Reply to Mark at 13:18 Nov-02-2017 (Opening).

Dear colleagues,
This article is devoted to determining the real size of a planar defect:
Opposite Phased Transducer – OPT for Sizing of Defects
http://www.researchgate.net/publication/266618048_Opposite_Phased_Transducer__OPT_for_Sizing_of_Defects

It uses a fundamentally different technology for length sizing.

I hope that this article will be interesting for you.
Your opinion is very important to me.

 
 Reply 
 

Product Spotlight

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window