where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

521 views
Technical Discussions
x.j.
Student,
China, Joined Jul 2004, 1

x.j.

Student,
China,
Joined Jul 2004
1
05:47 Jul-09-2004
How to distinguish inside and outside flaw of pipe by MFL?

which typic characteristic between inside flaw and outside flaw' signal by using MFL method? I use FFT or PSD to process the signals but no typic characteristic can be get now!
thanks a lot


    
 
 
fs
fs
02:38 Jul-09-2004
Re: How to distinguish inside and outside flaw of pipe by MFL?
----------- Start Original Message -----------
: which typic characteristic between inside flaw and outside flaw' signal by using MFL method? I use FFT or PSD to process the signals but no typic characteristic can be get now!
: thanks a lot
------------ End Original Message ------------

inside flaw and outside flaw' signal have different frequency.


    
 
 
MIC
Consultant
AGM Techno consultants, India, Joined Jan 2003, 22

MIC

Consultant
AGM Techno consultants,
India,
Joined Jan 2003
22
06:15 Jul-12-2004
Re: How to distinguish inside and outside flaw of pipe by MFL?
MFL was used normally as a tool to detect and not to distinguish between I.D and O.D. but I have operated an instrument that belongs to R/D tech to test tubes – carbon steel - who has got capability to do the distinguish.

I did operated 3-different Tank floor machines based on MFL , also other brands of tube inspection devices based on MFL, and a pipe scanner with permanent Magnet, and I always want to have this facility.

The fact was known that Frequency will be different for I.D and O.D flaws, but was not avail to me till I operated R/D instrument. Need more info please send mail to mic_ndt@yahoo.com



    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window