where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1075 views
Articles & News
Mark
,
Zambia, Joined Jun 2016, 49

Mark

,
Zambia,
Joined Jun 2016
49
13:18 Nov-02-2017
Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array
Overall

2
 
 Reply 
 
Vadim Kniazev
R & D, Director
Wave Process Simulation System Laboratory, Russia, Joined Jun 2010, 4

Vadim Kniazev

R & D, Director
Wave Process Simulation System Laboratory,
Russia,
Joined Jun 2010
4
19:04 Dec-01-2017
Re: Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array
In Reply to Mark at 13:18 Nov-02-2017 (Opening).

Dear colleagues,
This article is devoted to determining the real size of a planar defect:
Opposite Phased Transducer – OPT for Sizing of Defects
http://www.researchgate.net/publication/266618048_Opposite_Phased_Transducer__OPT_for_Sizing_of_Defects

It uses a fundamentally different technology for length sizing.

I hope that this article will be interesting for you.
Your opinion is very important to me.

 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window