where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
677 views
Technical Discussions
Omar Aly
Omar Aly
01:18 Jul-19-2004
Spread Spectrum Ultrasonic

If any one have information about Spread Spectrum Ultrasonic please send it to me.


 
 Reply 
 
Philippe Rubbers
Engineering
SCM, South Africa, Joined Nov 1998, 22

Philippe Rubbers

Engineering
SCM,
South Africa,
Joined Nov 1998
22
07:27 Jul-19-2004
Re: Spread Spectrum Ultrasonic
----------- Start Original Message -----------
: If any one have information about Spread Spectrum Ultrasonic please send it to me.
------------ End Original Message ------------

There are a number of approaches to Spread Spectrum Processing in the literature. If you do a search on NDT.net for Split Spectrum Processing, a few papers will also pop up.
There are also papers on Complex Plane Split Spectrum (CSSP) Processing which have a number of additional advantages, such as retained amplitude linearity, and further improvements in S/N ratios (among other).

A mathematical simulation of CSSP should become available on NDT.net (shareware) shortly. This software will be an extension of the currently shared diffraction simulation software (CSSP_Diff_Sim).
The link to the diffraction simulation software is as follows:
http://www.ndt.net/article/v09n04/rubbers/rubbers.htm
(click on the download button on the top right hand side)




 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window