where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
731 views
Technical Discussions
Zahra
Zahra
07:38 Jul-21-2004
phased Array transducer applications?

i am interested in getting some information regarding the application of phased array transducers in NDT; more specifically the type of the materials that can be inspected by this group of transducers, the maximum depth of penetration and thickness measurement, the improvement of SNR by these systems and...

i appreciate any information in advance


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1286

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1286
03:00 Jul-22-2004
Re: phased Array transducer applications?
Zahra:
Phased array probes can be used essentially just as if it was a regular single element unit...but far more adaptable to applications. Selecting a large annular array you can extend a beam to great depth and also maintain good resolution near the test surface.
Using a matrix array you can achive beam steering.
Signal to noise ratio is generally better for PA probes compared to single element because for the same voltage applied the constructive interference that builds the phased wavefront results in twice the amplitude particle displacement.
You must still contend with the normal limitations that ultrasound is subject to with regards to scatter and attenuation.

Ed
----------- Start Original Message -----------
: i am interested in getting some information regarding the application of phased array transducers in NDT; more specifically the type of the materials that can be inspected by this group of transducers, the maximum depth of penetration and thickness measurement, the improvement of SNR by these systems and...
: i appreciate any information in advance
------------ End Original Message ------------




 
 Reply 
 
Wolfgang Bisle
Wolfgang Bisle
09:11 Aug-03-2004
Re: phased Array transducer applications?
There is a simple solution for your question:
Look to the sites of manufacturers of array testing equipment.

A nice selection of application reports you will find on RD-Tech's homepage http://www.rd-tech.com/
But also GE-IT (US, including Krautkramer), Technology Design (UK),Multi 2000 (M2M, France), Harfang (Can) show applications...

The portable units like the Omniscan will change the field of application to nearly everywhere. Not everwhere you need the phased array , sometimes the array configuration already is suitable. But having both makes inspection easy.

Think of new materials like Fiber Metall Laminates, composites, but also monolithic metallic structures like rails, landing gears, and especially to contral joinings like electron beam welds, laser beam welds, friction stir welds ....

Just in aeronautics the array inspection technology will soon be the standard. Outrunning sometimes so high sophisticated technologies like thermography and shearography because of small equipment, easy and conventional (UT) training of personal (you need no new certificate)...and lot of other advantages.

so everywhere you can use single element UT also Array UT is possible and you will earn a lot of móre clarity while inspecting complex structures.


 
 Reply 
 
adewale
adewale
02:12 Sep-24-2004
transducers andits place in instrumentation,control and automation
------t-- Start Original Message :
hi zahra, ijust want to know more about the place of transducers in measurement control and automation.i'm an electrical engineering student.
hope to hear from you soon.


 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window