where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1101 views
Technical Discussions
Chris Chilton
Chris Chilton
02:38 May-14-2004
Cast Steel

I am trying to find an equivalent ISO and/or ASTM designations for BS 3100 Carbon & Manganese Casting Steels Grades AL1, AL2, AL3 & BL2.

Does anyone have any information on this or sources I can consult?


    
 
 Reply 
 
emily woo
emily woo
02:28 May-26-2004
Re: Cast Steel
i would like to know the advantages of CAST STEEL AS 2074 Grade C5.

----------- Start Original Message -----------
: I am trying to find an equivalent ISO and/or ASTM designations for BS 3100 Carbon & Manganese Casting Steels Grades AL1, AL2, AL3 & BL2.
: Does anyone have any information on this or sources I can consult?
------------ End Original Message ------------




    
 
 Reply 
 
James Dolfi
Director
ford, USA, Joined Oct 1999, 8

James Dolfi

Director
ford,
USA,
Joined Oct 1999
8
00:36 May-27-2004
Re: Cast Steel
----------- Start Original Message -----------
: i would like to know the advantages of CAST STEEL AS 2074 Grade C5.
: : I am trying to find an equivalent ISO and/or ASTM designations for BS 3100 Carbon & Manganese Casting Steels Grades AL1, AL2, AL3 & BL2.
: : Does anyone have any information on this or sources I can consult?
------------ End Original Message ------------

You may be able to get all the info you want at
http://www.key-to-steel.com/

They cross reference all steels and standards.



    
 
 Reply 
 
ian
ian
04:16 Jul-21-2004
Re: Cast Steel
thank you so much for this opportunity. i want to know about the chemical compositions of material called GS-60.3 . Thank you


    
 
 Reply 
 
Ed T.
Ed T.
05:28 Jul-22-2004
Re: Cast Steel
----------- Start Original Message -----------
: thank you so much for this opportunity. i want to know about the chemical compositions of material called GS-60.3 . Thank you
------------ End Original Message ------------
Try these links:

http://www.rz.fh-ulm.de/labore/wplabor/Englisch/FurtherInfo/Tests/Test11/metallographic%20determination%20v11.htm
http://www.felis.hr/en/cast-general.html
http://www.proximedia.com/local/jkservice/produkt1ban.htm


    
 
 Reply 
 

Product Spotlight

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window