where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
1472 views
Articles & News
David Reid
David Reid
17:18 Jan-01-2017
Photoelastic Visualisation of Phased Array Sound Fields: Part 25 – The So-Called Creeping Wave – Far Surface with linear phased-array probe
Overall

Hello Ed,

Have followed your brilliant career with great interest, and your photoelastic visualizatuons magnificent.

I have some input for you and some other types of visualization that I would love key to get your feedback on. My phone 587-987-0826

Your friend and colleague

Dave Reid

 
 Reply 
 
Paul Lake
Paul Lake
19:09 Jan-24-2018
Re: Photoelastic Visualisation of Phased Array Sound Fields: Part 25 – The So-Called Creeping Wave – Far Surface with linear phased-array probe
In Reply to David Reid at 17:18 Jan-01-2017 (Opening).

Please excuse this e mail if you find it intrusive.
I knew a Dave Reid in Oakville in the 70's when we worked for Atlas Labs NDT. We lost touch and it would be nice to reconnect.
Regards and apologies if its not you Dave!

Paul Lake

 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window