where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1061 views
Technical Discussions
Pauzi
Pauzi
02:05 Sep-03-1998
Corrosion Inspection by UT

Is there any standard/specification regarding UT of corrosion?. I mean, calibration, sensivity setting, and acceptance/rejection criteria.


 
 Reply 
 
Yosi Bar-Cohen
R & D,
Jet Propulsion Lab (JPL), USA, Joined Nov 1998, 26

Yosi Bar-Cohen

R & D,
Jet Propulsion Lab (JPL),
USA,
Joined Nov 1998
26
06:33 Sep-03-1998
Re: Corrosion Inspection by UT
: Is there any standard/specification regarding UT of corrosion?. I mean, calibration, sensivity setting, and acceptance/rejection criteria.

----------

Dear Mr. Pauzi,

There are many standards and specifications for NDE of corrosion
Most of the ones, with which I am familiar, are addressing specific
structures and they are manufacturer proprietary documents. There are
few generic documents that cover standard inspection procedures. As an
example, ASTM has a limited information in its E1004 Standards on Eddy current.

Yosi


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
07:31 Sep-03-1998
Re: Corrosion Inspection by UT
: Is there any standard/specification regarding UT of corrosion?. I mean, calibration, sensivity setting, and acceptance/rejection criteria.

----

Yosi Bar-Cohen mentioned already in his message that you can find standards
addressing certain components.
Here in Germany we have a guideline called US1
'Thickness Measurement with Ultrasound' published by the German Society for NDT,
however so far only in German available,
but I heard that an English version is on the way.

See:
New German guidelines to wall thickness measurement - will be available in English
http://www.ndt.net/news/wt_guid.htm

The handbook contains information on ultrasonic testing of corroded components.
For instance, it is recommended to use an echo display for corrosion gaging since
a blind test is often not reliable enough (digital numbers only).
Also a proper probe characteristic is needed accordingly to the specific geometry
of corrosion. Nowadays are guided waves (lamb waves) used for corrosion testing of
specific structures and depicting the area as an c-scan image without the need to
move the probe (e.g. aircraft structures, pipes).
Examples are aircraft structures and pipes. But since it is a new method I think
there exist no standard yet (Maybe Ahmad Chahbaz knows more about it).

You may also find information browsing/searching NDT.net issue 1997 No. 10 which
focuses on "Ultrasonic Thickness Measurement" http://www.ndt.net/ut1097.htm.

Rolf Diederichs



 
 Reply 
 
Cheryl Simplot
Cheryl Simplot
05:27 Mar-23-1999
Re: Corrosion Inspection by UT
: : Is there any standard/specification regarding UT of corrosion?. I mean, calibration, sensivity setting, and acceptance/rejection criteria.

: ----

: Yosi Bar-Cohen mentioned already in his message that you can find standards
: addressing certain components.
: Here in Germany we have a guideline called US1
: 'Thickness Measurement with Ultrasound' published by the German Society for NDT,
: however so far only in German available,
: but I heard that an English version is on the way.

: See:
: New German guidelines to wall thickness measurement - will be available in English
: http://www.ndt.net/news/wt_guid.htm

: The handbook contains information on ultrasonic testing of corroded components.
: For instance, it is recommended to use an echo display for corrosion gaging since
: a blind test is often not reliable enough (digital numbers only).
: Also a proper probe characteristic is needed accordingly to the specific geometry
: of corrosion. Nowadays are guided waves (lamb waves) used for corrosion testing of
: specific structures and depicting the area as an c-scan image without the need to
: move the probe (e.g. aircraft structures, pipes).
: Examples are aircraft structures and pipes. But since it is a new method I think
: there exist no standard yet (Maybe Ahmad Chahbaz knows more about it).

: You may also find information browsing/searching NDT.net issue 1997 No. 10 which
: focuses on "Ultrasonic Thickness Measurement" http://www.ndt.net/ut1097.htm.

: Rolf Diederichs




 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window