where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

369 views
Technical Discussions
Ron Hubbard
Engineering
USA, Joined Aug 2004, 3

Ron Hubbard

Engineering
USA,
Joined Aug 2004
3
08:22 Aug-04-2004
Need Help With A Transducer Design

I do research into vibration engineering and need a peculiar low ultrasonic (16.5- 20 kHz) transducer. Not able to find any useful information, I am thinking of putting together a stack of .625" dia x .0200" thick PZT disks bonded to a .875" dia brass disk. This is in accordance with the "shoot in the dark and hope you hit the right resonant frequency" method.

Does anyone have any suggestions that would improve on this design? Any help would be deeply appreciated. Thanks.

Ron



 
 Reply 
 
Wolfgang Bisle
Wolfgang Bisle
07:08 Aug-04-2004
Re: Need Help With A Transducer Design
I am not an expert in transducer design... but your requirements let me remember that the acoustic flaw detector AFD and today the bondmaster operates with transducers in this frequency range ...
But I think to give really good advices you should specify your needs a little better as
you would find "Monster"stacks for instance normally used for Ultrasound welding (Branson is selling this), we use them for Ultrasound excited thermography, you will find them in traditional shakers and as well in your cellular phone for ringing. And for Bond inspection in systems like the Bondmaster.




 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window