where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
3165 views
Career Discussions
Sean Peterssen
Sean Peterssen
07:45 Nov-15-2014
Interpretation of echo static and echo dynamic pattern combinations

My name is Sean Peterssen im a PCN level 2 Ultrasonic technician, I am looking for info or books on interperation and characterisation of echo static and echo dynamic combinations with pictures. Thank you and Regards Sean.

 
 Reply 
 
THEO MICOTTIS
Italy, Joined May 2013, 77

THEO MICOTTIS

Italy,
Joined May 2013
77
08:55 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Sean Peterssen at 07:45 Nov-15-2014 (Opening).

Dear Sean, EN ISO 23279 is an option. Regards Theo

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
09:59 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to THEO MICOTTIS at 08:55 Nov-15-2014 .

Sean

In 1986 The Welding Insitute, on behalf of the International Institute of Welding, produced a 50 page A5 booklet entitled "Evaluation of ultrasonic signals". This dealt exclusively with signals from flaws in welds.

Of particular interest are 7 pages of diagrams depicting typical echodynamic patterns expected from different flaw types. Its objective was to assist the operator to "..make an estimate of a defect's through-thickness size, even for very small defects."

Perhaps TWI still have them in stock.

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 178

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
178
15:35 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Sean Peterssen at 07:45 Nov-15-2014 (Opening).

Hello Sean,

the following standard may help to evaluate moving ultrasonic signals:
ISO 16827:2014, Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities.

This standard is also a European Standard: EN ISO 16827.

With best regards

 
 Reply 
 
Rambabu
NDT Inspector,
AL HOTY STANGERS-SAUDI ARABIA, India, Joined May 2017, 1

Rambabu

NDT Inspector,
AL HOTY STANGERS-SAUDI ARABIA,
India,
Joined May 2017
1
22:45 Aug-18-2018
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Udo Schlengermann at 15:35 Nov-15-2014 .

BS EN ISO
16827:2014 how to get this standards..

 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window