where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GRANPECT COMPANY Ltd
GRANPECT bends to the industrialization of high-tech research achievements and specializes in research and development of various X-ray radiation imag ...
640 views
Technical Discussions
kamran azari
kamran azari
03:39 Aug-22-2004
Detection of inclusions in sheet steels by magnetic particle inspection.

Dear Sir/Madam,
I am a M.Sc student in Materials science and technology. I,m very interested in the "detection of inclusions in cold rolled sheet steels by magnetic particle inspection". I need some information about the "current intensity and location (depth) and size of the inclusion which will be detected". Some articles have information about only two of them. Would you please send me some information relative to this subject.

Sincerely,
Kamran Azari


80, mousavi court
yahyakhan alley, chaharbagh bala ave.
Isfahan, 81736 67731
IRAN.


 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 523

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
523
03:02 Aug-22-2004
Re: Detection of inclusions in sheet steels by magnetic particle inspection.
In rolled steel sheet Inclusions will be transformed by the rolling process into delaminations, parallel to the surface. MPI is unlikely to be an effective method to detect them, since in this orientation they will cause minimal disturbance to the flux lines. UT is likely to be a more effective method

Rgds

Joe

----------- Start Original Message -----------
: Dear Sir/Madam,
: I am a M.Sc student in Materials science and technology. I,m very interested in the "detection of inclusions in cold rolled sheet steels by magnetic particle inspection". I need some information about the "current intensity and location (depth) and size of the inclusion which will be detected". Some articles have information about only two of them. Would you please send me some information relative to this subject.
: Sincerely,
: Kamran Azari
:
: 80, mousavi court
: yahyakhan alley, chaharbagh bala ave.
: Isfahan, 81736 67731
: IRAN.
------------ End Original Message ------------




 
 Reply 
 
Sandro
Sandro
09:21 Aug-23-2004
Re: Detection of inclusions in sheet steels by magnetic particle inspection.
----------- Start Original Message -----------
: Dear Sir/Madam,
: I am a M.Sc student in Materials science and technology. I,m very interested in the "detection of inclusions in cold rolled sheet steels by magnetic particle inspection". I need some information about the "current intensity and location (depth) and size of the inclusion which will be detected". Some articles have information about only two of them. Would you please send me some information relative to this subject.
: Sincerely,
: Kamran Azari
:
: 80, mousavi court
: yahyakhan alley, chaharbagh bala ave.
: Isfahan, 81736 67731
: IRAN.
------------ End Original Message ------------


Good morning Kamran Azari,
You have to know ASTM E-709 "Standard Guide for Magnetic Particle Examination"

Best regards,

Sandro
BOLIVIA




 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window