where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

PBP Optel sp. z o.o.
Weare searching new ways - in ultrasonic techniques- in creation of new productsUltrasonic instruments - Ultrasonic Testing Card

965 views
Career Discussions
Frank
Germany, Joined Aug 2017, 8

Frank

Germany,
Joined Aug 2017
8
11:27 Jan-08-2019
BS EN ISO 9712 and hold PCN Level 2 certification

Hello everybody,can anyone explain the following facts.

NDT Personnel shall be accredited in accordance with BS EN ISO 9712 and hold PCN Level 2 certification for Liquid Penetrant testing of General sector products (castings, forgings and weldments)

Are 2 qualifications required here?
Once the ISO 9712 and in addition to PNC Level 2?Is the PNC independent Qaulification?

Thank you for your help.

Frank

    
 
 
John Moody
John Moody
16:16 Jan-14-2019
Re: BS EN ISO 9712 and hold PCN Level 2 certification
In Reply to Frank at 11:27 Jan-08-2019 (Opening).

ISO 9712 is the standard for Non-destructive testing — Qualification and certification of NDT personnel. The BS and EN show that the standard has been published in Britain and Europe. The important part is the ISO which stands for International Standards Organisation. PCN is one of the providers of certification to ISO 9712, there are many other bodies around the World who are also providers and their schemes have different names and will mention locally published versions of ISO 9712.

    
 
 
Frank
Germany, Joined Aug 2017, 8

Frank

Germany,
Joined Aug 2017
8
12:28 Jan-16-2019
Re: BS EN ISO 9712 and hold PCN Level 2 certification
In Reply to John Moody at 16:16 Jan-14-2019 .

Hello Mr. John Moody,

Thank you for the answer.In this case, "PCN" is comparable to the NDT training center "Dgzfp" in Germany.

Have I understood that correctly?

Thanks for an answer.

Greeting Frank

    
 
 
John Moody
John Moody
09:07 Jan-17-2019
Re: BS EN ISO 9712 and hold PCN Level 2 certification
In Reply to Frank at 12:28 Jan-16-2019 .

Hello Frank,

There are differences between the Certification Schemes but both are ISO 9712 compliant. PCN is audited by UKAS to verify this and I would expect that "Dgzfp" are audited by the German national accreditation body.

Regards, John.

    
 
 
Petronext International
Petronext International
10:00 Feb-09-2019
Re: BS EN ISO 9712 and hold PCN Level 2 certification
In Reply to Frank at 11:27 Jan-08-2019 (Opening).

The important part is the ISO which stands for International Standards Organisation.

    
 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window