where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1021 views
Technical Discussions
Simon
Simon
10:33 Jan-17-2019
Purpose of using 30 degree probe in Ultrasonic Testing

Hi everybody,
Please help me to understand the purpose of using 30 degree probe in Ultrasonic Testing
Thanks !

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 815

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
815
12:10 Jan-19-2019
Re: Purpose of using 30 degree probe in Ultrasonic Testing
In Reply to Simon at 10:33 Jan-17-2019 (Opening).

Bad Choice.
This is close to the 1st critical angle of 32.6 degrees. shear wave drops at angles below 40 degrees

 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
23:44 Jan-20-2019
Re: Purpose of using 30 degree probe in Ultrasonic Testing
In Reply to Simon at 10:33 Jan-17-2019 (Opening).

If my memory serves me this wedge designation was mainly used in the USA and the sound wave produced was a 30 degree shear wave in carbon steel, not much use for most people.
But it also produced a high angle 'L' wave in stainless steel and it also produced 'creeping' waves

regards

Neil Burleigh

 
 Reply 
 
Bruce McPherson
Consultant
MFL Services, United Kingdom, Joined Mar 2009, 26

Bruce McPherson

Consultant
MFL Services,
United Kingdom,
Joined Mar 2009
26
09:03 Jan-21-2019
Re: Purpose of using 30 degree probe in Ultrasonic Testing
In Reply to Simon at 10:33 Jan-17-2019 (Opening).

We used them successfully to detect longitudinal cracks on the bore of thick walled steel pipe.
The beam from a typical shear wave probe, when placed on the outer surface of the pipe would simply not intersect the internal surface of the pipe and was therefore unable to detect the cracks.
We used several probes in the 20-30 degree range depending on the actual thickness of the pipe.
We called them "angled compression probes", but I'm not sure if this is the correct technical term for them

 
 Reply 
 
Edward Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Edward Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
13:58 Jan-21-2019
Re: Purpose of using 30 degree probe in Ultrasonic Testing
In Reply to Neil Burleigh at 23:44 Jan-20-2019 .

Neil, your recollection of the old days reminded me that the probe and the technique used to be called the 30-70-70. Some people today like to call this a creeping wave probe. The 30° shear is subcritical so has a bulk compression mode associated with it that has an angle of refraction of approximately 70°.
There is a good description of the various options for dissimilar metal weld inspections provided in a paper in a 1996 edition of NDT.net https://www.ndt.net/article/pow1297/schmid/schmid1.htm#4213

 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window