where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS
1076 views
Technical Discussions
Philip Veipert
Philip Veipert
02:10 Mar-23-1999
Detailed list of companies in Houston Texas

Anyone having a list of companies who use or preform NDT services in the Houston , Texas area I would appreciate it.


 
 Reply 
 
mark thompson
mark thompson
03:09 Mar-23-1999
Re: Detailed list of companies in Houston Texas
: Anyone having a list of companies who use or preform NDT services in the Houston , Texas area I would appreciate it.

MQS Inspection has a Houston office 1-800-ndt-labs


 
 Reply 
 
Sonic Systems International, Inc. (SSI) 281-531-7611
Sonic Systems International, Inc. (SSI) 281-531-7611
05:10 Apr-07-1999
Re: Detailed list of companies in Houston Texas
: : Anyone having a list of companies who use or preform NDT services in the Houston , Texas area I would appreciate it.

: MQS Inspection has a Houston office 1-800-ndt-labs

: (SSI) Sonic Systems International, Inc.281-531-7611


 
 Reply 
 
Phillip Fass
Phillip Fass
05:46 Apr-07-1999
Re: Detailed list of companies in Houston Texas
: Anyone having a list of companies who use or preform NDT services in the Houston , Texas area I would appreciate it.

Try Visual Inspection Technologies:888-848-5665 They have products for sale, rent or will do field service for you.


 
 Reply 
 
Jan Verkooijen
Director,
Sonovation, Netherlands, Joined Nov 1998, 29

Jan Verkooijen

Director,
Sonovation,
Netherlands,
Joined Nov 1998
29
07:58 Apr-07-1999
Re: Detailed list of companies in Houston Texas
: Anyone having a list of companies who use or preform NDT services in the Houston , Texas area I would appreciate it.

You could try our US office in North Carolina, (AEA Technology Engineering Services Inc),
tel. 704 875 9573 fax 704 875 8114, or N-Spec, who is a franchisee of our
equipment and services at Corpus Christy: 281 575 8200, fax 281 575 8223.


 
 Reply 
 
Peter Simpson
Director,
Ashtead Technology Ltd, United Kingdom, Joined Oct 1999, 12

Peter Simpson

Director,
Ashtead Technology Ltd,
United Kingdom,
Joined Oct 1999
12
08:20 Apr-07-1999
Re: Detailed list of companies in Houston Texas
: Anyone having a list of companies who use or preform NDT services in the Houston , Texas area I would appreciate it.

Ashtead Technology has an office in Houston where you can rent a wide range
of NDT equipment.

Contact Chris Echols

Tel: 281 398 9533
Fax: 281 398 3052




 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window