where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

248 views
Job Offers
Emmanuel
Emmanuel
14:45 Feb-11-2019
We are looking for ACFM technicians for long term and offshore projects.

Job Location: Qatar
offered by Frontier Certification International

Job Location: Qatar

Requirements:

• Qualified under ISO 9712 by PCN / CSWIP /ACCP/CP 106 as NDT Level 2 in ACFM/CHIME
• Candidate with Multi PCN and ECT or RTFI qualification will be given priority.
• 5+ years of post-certification work experience must.
• Knowledge of Hardness , Holiday , Borescope and vacuum Box inspection desirable.
• Interview will be Telephonic (or ) Direct by the Client.
• Only Shortlisted candidate’s only will be contacted.
• Able to interpret work packages, technical drawing and specification.

Please send your Updated CV to : info@fci-qatar.com

Your email should include following document in attachment:

1. Copy of Passport and current visa status (if any)
2. List of previously worked country and type of visa worked on.
3. CV in editable format with local and international contact details.
4. Copy of PCN / CSWIP Wallet Card and certificate with validity.
5. Experience letters.

    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window