where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
526 views
Technical Discussions
abdulla
Engineering, CORROSION DIV. SUPERINTENDENT
SIRTE OIL COMPANY, Libya, Joined Jun 2004, 7

abdulla

Engineering, CORROSION DIV. SUPERINTENDENT
SIRTE OIL COMPANY,
Libya,
Joined Jun 2004
7
06:42 Sep-01-2004
WELDING TEST

When a UT can be used instead of RT .
Thank you in advance


 
 Reply 
 
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
06:07 Sep-02-2004
Re: WELDING TEST
----------- Start Original Message -----------
: When a UT can be used instead of RT .
: Thank you in advance
------------ End Original Message ------------

RT is very much expensive method and can not use for 100 % weld testing. To cover the 100% weld testing and production capacity is more then UT by autometion or semiautometion can used. We are mfg. of autometed /Semiautometed UT system.

If have any interest , please contact us.

Warm regard
S.G.


 
 Reply 
 
Ed T.
Ed T.
08:24 Sep-02-2004
Re: WELDING TEST
----------- Start Original Message -----------
: When a UT can be used instead of RT .
: Thank you in advance
------------ End Original Message ------------

Which code?


 
 Reply 
 
appalarao
appalarao
02:12 Nov-03-2006
Re: WELDING TEST
weilding----------- Start Original Message -----------
: When a UT can be used instead of RT .
: Thank you in advance
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window