The Largest Open Access Portal of Nondestructive Testing (NDT)

745 views Technical Discussions David Harvey Engineering ATI - Wah Chang, USA, Joined Nov 2002, 42 David Harvey Engineering ATI - Wah Chang, USA, Joined Nov 2002 42 06:14 Sep-02-2004 Transducer source - need address Does anyone have the website or email address for Megasonics, operated by Mr. Koo Chung?    Reply  Translate  Close   Rolf Diederichs Director, NDT.net, Germany, Joined Nov 1998, 617 Rolf Diederichs Director, NDT.net, Germany, Joined Nov 1998 617 09:49 Sep-02-2004 Re: Transducer source - need address Greetings from the WCNDT Exhibition. I just meet Mark Warchol and he told me that Megasonics has no Web site, but Mark has their Phone number at home, so contact him at mark.warchol@alcoa.com Rolf ----------- Start Original Message ----------- : Does anyone have the website or email address for Megasonics, operated by Mr. Koo Chung? ------------ End Original Message ------------    Reply  Translate  Close

Product Spotlight Wireless TOFD scanner StandOKOndt GROUP Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat ... ible with any type of Windows based Laptop, Desktop or Tablet. > 6 Showcases6 Videos Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection StandPH Tool Reference Standards This set of two blocks has been specially designed for situations where ultrasonic examination tak ... es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces. > 5 Showcases5 Videos Research and Application Development For NDT StandECLIPSE SCIENTIFIC Acuren’s Research and Application Development specializes in the development of advanced ultraso ... nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications. > 3 Showcases5 Videos Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures StandDantec Dynamics GmbH An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures ... with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection. > 4 Showcases more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996