where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

579 views
Job Offers
Prakash Sachapara
Prakash Sachapara
11:09 Mar-13-2019
PAUT & TOFD LEVEL II, RTFI, A-SCAN UT OPERATOR

Job Location: Hazira, Surat, Gujarat
offered by SLOK NDT & INSPECTION SERVICES

We have requirements for below mentioned positions.
Candidates with relevant experience shall only be considered.

1) ToFD & PAUT Level II operator
Minimum 1 year of practical experience on welds.
Duty hours: 08 hrs
Salary: INR 25,000-INR 30,000/month (Based on interview) + OT
Accommodation will be provided

2) RTFI
Minimum 1 year of experience as a RTFI
Duty hours: 08 hrs
Salary: INR 16,000-INR 18,000/month (Based on interview) + OT
Accommodation will be provided

3) A-scan UT operator
Minimum 1 year of practical experience on welds.
Duty hours: 08 hrs
Salary: INR 16,000-INR 18,000/month (Based on interview)
Accommodation will be provided

    1
 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Trade-In Offer

We are offering our existing clients trade-in against Wavemaker® G3 systems, Standard (Blue) inflat
...
able rings and modules for excellent deals on the latest Wavemaker® G4mini system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window