where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

394 views
Technical Discussions
Anonymous
Anonymous
03:55 Sep-08-2004
MT Field Strength Equation

Where does the 45,000 constant come from in the equation to determine longtitudinal field strength using the length/diameter ratio when using Magnetic Particle testing?


 
 Reply 
 
DJ Kallhof
DJ Kallhof
03:02 Sep-09-2004
Re: MT Field Strength Equation
----------- Start Original Message -----------
: Where does the 45,000 constant come from in the equation to determine longtitudinal field strength using the length/diameter ratio when using Magnetic Particle testing?
------------ End Original Message ------------
It is considered a rule of thumb. By using 45,000 while in contact with the coil and 43,000 centered the resultant flux density will be 70,000 lines per square inch (110 lines per square mm). To quote BETZ;"Extensive experimental work has shown that a field of 70,000 lines per square inch is a satisfactory field strength for almost all cases of coil magnetization.



 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window