where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
185 views
Technical Discussions
osama
osama
04:55 Apr-10-1999
Re: measuring paper
: There is some good information available in regards to your paper testing project:
: I am referring to the publications from M. Luukkala:
: 1) M. Luukkala, "Tenscan, an Acoustic NDE Device to Measure Tension in a Moving Paper Web" in 1990 Rev.Prog.in QNDE, D.O. Thompson and D.E. Chementi eds. (plenum, New York, 1990) pp.1987-1981
: 2) M.Luuukkala, P. Heikkila and J. Surakka: "Plate wave resonance- a contactless test method. Ultrasonics, October 1971. Editors are the Department of Technical Physics, Helsinki & Universtity of Technology, Otamiemi, Finland
: (Remark: VERY IMPORTANT PAPER)
: 3) M. Luukkala and P. Merilainen: "Metal Plate testing using airborn ultrasound.
: 4) Department of Physics, University of Helsinki, Finland 11 April 1973.
: 5) In regards to further references, transducer types and applications, you may like to look at:
: "NDE Applications of Air-Coupled Ultrasonic Transducers" W.A. Grandia and C.M. Fortunko. IEEE Ultrasonics, Ferroelectrics, and FrequencyControl. Novenber 7 - 10, 1995.
: 1995 IEE International Ultrasonic Symposium, Seattle, Washington.

: At our laboratory: QMI Inc. 919 Sunset Drive, Copsta Mesa, CA 92627 USA., we have developed an air-coupled ultrasonic instrument: SONDA-007. It can operate at discrete toneburst mode (200kHz, 400 kHz and 1 MHz). This device may be used to launch platewaves into paper sheet and detectr the through transmitted signals. It is possible to transmit signals over a fairly long distance.
: If you have trouble finding the papers, please let me know and I can arrange for copies.
: Wish you success with your project.
: W. Grandia P.E.
: President QMI Inc.




 
 Reply 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window