where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2165 views
Job Offers
Xavier Louis
Saudi Arabia, Joined Oct 2018, 3

Xavier Louis

Saudi Arabia,
Joined Oct 2018
3
14:21 Apr-14-2019
Requirement of Multi NDT Technician

Job Location: Saudi Arabia
offered by Gulf Quality Control Company Ltd

Company Name: Gulf Quality Control Company Ltd
Location: Saudi Arabia
Contract: Long Term
Position: Multi NDT Technician (RT, MT, PT & UTT)
Accomodtion: Company will provide
Food: Company will provide as per company policy
Transportation: Company will provide

We are recruiting Multi NDT Technicians (RT, MT, PT & UTT) for long term projects in Saudi Arabia. Candidates shall at least 5 years experience in Saudi Arabia along with RT, UTT, MT and PT methods or 3 years experience with Diploma in any stream.

Note: Pakistan, Nepal, Bangladesh and Srilankan nationality only apply

Interested candidates may send their CV's to andt@gqcco.com; Contact number: +966567318795

    
 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window