where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
734 views
Technical Discussions
yanxiang
yanxiang
02:51 Sep-11-2004
acoustic absorption of Low density polyethylene

Where can I find the frequency and/or temperature dependence of the acoustic absorption for the Low density polyethylene material?


 
 Reply 
 
Rolf D.
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf D.

Director,
NDT.net,
Germany,
Joined Nov 1998
608
03:55 Sep-11-2004
Re: acoustic absorption of Low density polyethylene
----------- Start Original Message -----------
: Where can I find the frequency and/or temperature dependence of the acoustic absorption for the Low density polyethylene material?
------------ End Original Message ------------

You can try the following references:

Plastic Material's acoustic properties
http://www.ndt.net/links/proper.htm

Ultrasonic Testing in pipe extrusion
http://www.ndt.net/article/rohrext/us_pk/us_pk_e.htm
and open here the diagram "Sound attenuation"


 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window