where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

141 views
Job Seeks
BASHA
Engineering,
HIDADA , India, Joined Jan 2011, 13

BASHA

Engineering,
HIDADA ,
India,
Joined Jan 2011
13
08:53 May-11-2019
CSWIP 3.2.2 ASNT LEVEL II UT PT MT RT

Job Location: Worldwide

 Ensure that all inspection Activities are performed as per approved ITP. And ensure that all resources are available for the effective performance of Inspection Activities.
 Ensure RFI raised for required materials prior to erection.
 Provide proper guidance for QC Inspector during tack Inspection
 Co-ordinate with client during raw-material inspection
 Preparation of all related inspection test reports and check list.
 Annular Plates, Bottom Plates, Roof Plates lying and fit up inspection.
 Inspection of Shell plates vertical fit up and horizontal fit up.
 Modifications of tanks with shell patch plates fit up inspection.
 Inspection of nozzle orientation and fit up inspection with RF pads.
 Carry out RF pad pneumatic test, Bottom & Roof plates vaccum box testing.
 Carry out inspection of Oil Penetrant test or MPI for shell plates with bottom plates’s fillet weld.
 PT of shell plates Vertical seam & circumference seam back chipping inspection.

    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window