where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing
282 views
Technical Discussions
saroj
NDT Inspector,
KNDT UAE TECHNO INSPECTION LLC, Nepal, Joined Apr 2019, 6

saroj

NDT Inspector,
KNDT UAE TECHNO INSPECTION LLC,
Nepal,
Joined Apr 2019
6
09:00 May-12-2019
probe size in paut

can any one share the idea to select probe size for weld inspection depending on the thickness?

    
 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 738

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
738
16:37 May-14-2019
Re: probe size in paut
In Reply to saroj at 09:00 May-12-2019 (Opening).

Use larger aperture with increase in thickness.
What thickness are you inspecting ?

    
 
 Reply 
 
Andrej
ApplusRtd, Lithuania, Joined May 2019, 9

Andrej

ApplusRtd,
Lithuania,
Joined May 2019
9
20:11 May-14-2019
Re: probe size in paut
In Reply to saroj at 09:00 May-12-2019 (Opening).

Do you have any procedure?

    
 
 Reply 
 
NOUFEL.T.MUHAMMED
NOUFEL.T.MUHAMMED
19:13 May-15-2019
Re: probe size in paut
In Reply to saroj at 09:00 May-12-2019 (Opening).

You can use the parameter 'PITCH' for probe selection for thickness variations.
Lower thickness(<7mm)-use 0.3mm pitch probes
medium thickness(7mm-50mm)-use 0.6mm pitch probes
Higher thickness (>50mm)-use 1mm pitch probes
*contents as per my experience only.

    
 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window